Installing a Brick Paver Walkway or Concrete Masonry Bricks

The usage of Bricks or Pavers to produce a walkway or patio area complements a home in a method that is unmatched. In addition, setting up a Brick or Paver pathway does not always require a pro.

The key to setting up a Brick or Paver Walkway is to first effectively prepare the area where the bricks/pavers are to be set up. The area should be removed at least a foot down, eliminating all topsoil and clay soil. In addition, string lines should be strung on each side of the sidewalk. The string lines indicate the ended up height of the walkway.
When the location has been dug down, 3/4" gravel stone ought to be laid in and tamped down securely. The height in between the tamped down sand and the stringline ought to equal the density of the brick or paver.

Now that you have a steady base, place a 1" pipe or ledger board the length of the pathway on either side of the sidewalk. Using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will produce a level area to lay the bricks/pavers.

Now location on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the ready location. These strips will act as your sidewalk border and assistance to preserve the stability and shape of the walkway.

When this is done, you can then begin to lay the bricks/pavers. There are many patterns you can lay. I particularly like the Herring Bone pattern. The key to laying the bricks/pavers is to ensure that they interlock with each other. Always stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will again help maintain the stability of the sidewalk.

When developing the sidewalk, undoubtedly bricks/pavers will require to be cut or split. Unless you desire to purchase here or lease a pricey wetsaw, I would recommend buying an easy brick/paver splitter. It is generally a sculpt with a wide end that is the width of the bricks/pavers. To actually cut/split the brick/paver, lay it in a bed of sand and location the chisel at a 75 degree angle over the spot where you wish to break the brick. Utilizing a hammer strike the butt end of the chisel firmly. You might need to do this a number of times. You might also desire to flip the brick/paver over and strike the opposite of the brick using the hammer and chisle. Within a couple of strikes the brick/paver need to break cleanly. If your walkway has curves you will require to buy/rent a wetsaw.

After installing the bricks, develop the outside edges with extra sand, and then shovel in the topsoil more info and load down firmly.
Spread stone dust over the new sidewalk and sweep into the cracks. Repeat this procedure a number of times to make sure the cracks are completely filled. This will complete the interlocking of the bricks and help to remove any weed growth. Just include turf seed to the outdoors edges and you should have a stunning entryway to your home within a number of weeks.


In addition, setting up a Brick or Paver sidewalk does not necessarily require a pro. The secret to setting up a Brick or Paver Walkway is to very first properly prepare the area where the bricks/pavers are to be set up. Now that you have a steady base, position a 1" pipe or ledger board the length of the sidewalk on either side of the walkway. These strips will act as your walkway border and assistance to keep the stability and shape of the sidewalk. Inevitably bricks/pavers will need to be cut or split when developing the pathway.

Leave a Reply

Your email address will not be published. Required fields are marked *